even with highly anisotropic particles leads to nearly isotropic artifacts due to the uniform exertion of the pressing forces onto the flexible moulds.
EC Series graphite material is an especially fine grain, dense, isotropic graphite. Isostatic press graphite has many good characteristics such as high strength, excellent thermal shock resistance to high temperature and oxidation, low specific resistance, good anticorrosion, ease of precise machining, high purity, and also have the merits of large size and good isotropy.
Item | Typical Specifications (mm) | Bulk Density (g/cm3) Min. | Porosity (%) Max. | Compressive Strength (MPa) Min. | Specific Resistance (μΩ.m) Max. | Ash Content (%) Max. | Recommended Applications |
---|---|---|---|---|---|---|---|
SLV-1 | 400×400 450×450 | 1.70 | 24 | 35 | 15 | 0.005 | Heaters,heating shield, boat and crucibles for monocrystal silicon furnace and Moulds for continuous casting |
SLV-2 | 770*400*180 | 1.71 | 23 | 50 | 15 | 0.005 | |
SLV-3 | 400×400×310 770×400×180 550×300×160 | 1.78 | 20 | 60 | 15 | 0.005 | |
NOTE : The above data is the max. and min. data, the data actually measured will be better ·We can make especially according to your requirements in sizes and specifications. |